My Day✳All blog articles ↗

Separate touch-dry from fully cured

Name both finish stages and count their stated times from the instruction’s specified starting point.

A finish can become touch-dry before it is fully cured. Use the chosen material’s instructions and conditions, keeping these stages separate. Recording surface dryness does not complete curing. Elapsed time alone also cannot replace a readiness check required by those instructions.

Touch-dry 1 h; full cure 24 h; 23 h remain after hour 1.
Touch-dry 1 h; full cure 24 h; 23 h remain after hour 1.

What to do

  1. Record each stage, its conditions and the specified common timing origin.
  2. Mark the confirmed stage separately, leaving the full-cure task unfinished.
  3. Check the required readiness before taking the next action permitted by the instructions.

Example

Fictional Finish-A specifies touch-dry at 1 hour and full cure at 24 hours after application. At hour 1, only the first stage is confirmed; 23 hours remain to the second stated time. These are not Mod Podge timings, and full cure remains unconfirmed.

My Day · Windows

In My Day, manually save the checked details in a project note and add the next checking task.

Buy My Day for Windows ↗